In this early haymaking season, MLT is there to help you maintain and repair your round baler belts, bale wrappers and other harvesting machines.
ROUND BALERS / BALE WRAPPER BELTS
Thanks to their 3-layer specific carcass, MLT belts designed specifically for agriculture are resistant to tension without any variation in length. They can be used with any type of splice (vulcanization, mechanical fasteners or our patented ISC® splice) and can be installed on any machine within the market.
Available in 6 shapes, by the metre or in rolls. We have a premium quality stock at your disposal, allowing us to react quickly to provide you with solutions in the shortest possible time.
Smooth grained | Double grained | Roughtop | Diamond-shaped | Striated | |
---|---|---|---|---|---|
Carrier face profile |
|
![]() |
![]() |
![]() Diamond-shaped |
![]() Striated |
Belt thickness, mm. | 6,5 | 6,2 | 6,5 | 8,5 | 7 |
Min. winding diameter, in mm | 83 | 83 | 83 | 89 | 89 |
Available widths, in mm | From 100 to 1400 | From 100 to 1245 | From 100 to 1245 | 178 | From 100 to 700 |
FASTENERS AND LACING FOR ROUND BALERS
Your best partner in case of emergency! This mechanical fastener to screw can be installed without special tools: a screwdriver and a hammer are all you need.
Repair kits available for 180 and 300 mm widths, larger widths on request.
MS 25 | |
Belt thickness, in. | 9/64 - 16/64 |
Maxi belt tension, N/mm | 45 |
Maxi belt strength, N/mm | 450 |
Mini pulley Ø, in | 3 |
The heavy-duty reference staples, suitable for intensive use (dry and wrapped), compatible with belts up to 360 mm wide.
Can be installed with a vice-tool.
Sharp staples : do not damage the belt carcass
Double ancrage : évite le phénomène de "peignage" de la bande
Installation / Manual operated hydraulic installation press or hammer installation tool
T 05 | |
Belt thickness, in. | 3/16 - 9/32 |
Maxi belt tension, N/mm | 45 |
Maxi belt strength, N/mm | 450 |
Mini pulley Ø, in | 3 |
Also available in T 10 H, T 1R, T 10, T 14 et T 2
HOT-VULCANIZED SPLICED BELT
We provide hot-vulcanized spliced belts to replace your old belts, perfectly fitted to all machines on the market, even on large widths.
ISC® (Integrated Screw Connection)
The innovative, uncompromising belt : the splice is integrated directly into the belt.
No need to disassemble your machine: hook your new belt to the old one, remove the old belt, screw in, your belt is replaced in less than an hour.
Immediate implementation of an endless belt by simple screwing
No disassembling, it is inserted between the rolls
No connecting axle, therefore no axle wear
Waterproof: no passing of materials
Longevity and strength close to a seamless endless belt and 3 times stronger than a metal staple
G 2001
Highly resistant
Installation / A vice tool or an open ended hammer tool
G 2001 | ||
Belt thickness, in. | 3/16 - 9/32 | |
|
45 | |
|
450 | |
|
3 |