Fix'N Go® - INNOVATION -
.JPG)
A flexible repair solution to screw !
FIX’N GO® is an innovative and quick solution
to repair rips or damages on conveyor belts.
YOUR PROBLEM
-
Longitudinal rip
-
Crosswise rip
-
Belt edge rip
-
Holes, tears
-
Splicing 2 belts together in the longitudinal direction
YOUR SOLUTION
To resolve these situations, the MLT teams have created a unique and innovative repair’s solution for conveyor belts : FIX’N GO®.
Made with a strengthened fabric and a rubber with a very high abrasion index of 50mm3, FIX’N GO® offers a higher protection against frictions and wear than your conveyor belt used, without impacting its flexibility, resistance to elongation and tensile strength.
By repairing your belt with FIX’N GO®, you use a permanent solution with no need to replace it in the future. The MLT specific screws are self-drilling and selftapping : the carcass threads are spread without being cut.
FIX’N GO® can be used to repair longitudinal rips, holes and belt edge damages.
FIX’N GO® can also be used to splice two belts in the longitudinal direction.
FIX’N GO® is usable for all multi-ply and mono-ply textile carcass belts, up to 1250 N/mm.
|
|
1 Product for all applications |
Applications :
• Mines
• Cement plants
• Quarries
• Heavy industries
• And other…
-
Repair of mono-ply and multi-ply belts up to 1250 N/mm
-
4 versions of rubber are available
|
PACKAGING
Available in 2 boxes : 2 m or 20 m
Screws included
Steel screws and inserts or Stainless steel screws and inserts
|
 |
INSTALLATION TOOLS
-
powered screwdriver
-
belt skiver
|
FEW DATA...
Width : 158 mm
Thickness top plate : 3 to 4 mm
Thickness bottom plate : 2 to 3 mm
Quantity of screws per meter : 150
|
|
 |