Cable drawing belts

 

Cable drawing belts are used in caterpillar or capstan machines after cable extrusion. Our cable drawing belts are manufactured on demand, with high strength up to 2 500 N/mm. They are used by cable, rubber tube, high density cured polyethylene manufacturers... 
  • 2 available colors : white and black 
  • Grooves on demand 
  • No splice = no belt opening risk
  • Homogeneous belts = no extra thickness
  • Run around really small pulley diameters
  • Straight pulling under differents speeds
  • Grooves into shape : grinding, grooves, half moon, V, poly-V....

 

 

Breaking tension /
Up to 2 500 N/mm
 
Carcass / 
- Rolled on fabric up to 5 plies
- Rolled cord (Rayon or Aramid)
- Metallic cables
- Poly-V synchronous hot vulcanized rubber covers.
 
Covers Rubbers /
 from 40 to 80 Shores A
- abrasion resistant (excellent abrasion index of 50 mm3)
- oil and grease resistant, in particular for copper (index 115 mm3)
- heat retardant up to 200°C (abrasion index 115 mm3)
- white - non stain - (abrasion index 110 mm3)
 
Endless /
length Up to 20 000 mm

 
Width /
Up to 300 mm

 

Which splice to SELECT ?

> Click here !

Library

Not a member yet ? Subscribe